**States Of Matter**

· Water exists in three state i.e. solid (ice), liquid (portable water), gas (steam, vapors).

· In these three states water has different physical properties but same chemical composition i.e. H

_{2}O· Also characteristics of these states of water depend on the molecular energy and how molecules aggregate.

· As molecules change its physical state (from liquid to gas, gas to liquid, solid to gas etc.) there is no change in chemical properties of the substance but some changes may occur in rate of chemical reaction.

**Intermolecular Forces**:

These are forces of attraction and/or repulsion between the interacting particles i.e. atom or molecules.

Dutch Scientist J. Van der Waals (1837-1923) explains deviation of the real gases from ideal behavior with intermolecular forces, so intermolecular forces are also called as van der waals forces.

Example: Hydrogen bonding which is strong dipole-dipole interaction.

**Dispersion Forces**:

If an atom gets instantaneous dipole (i.e. Atom has more electron density in right or left hand side) then its nearby atom become induced dipole, so these two temporary dipole attract each other. This attraction force is known as dispersion forces.

· As these forces were first proposed by F. London so these forces are also known as London forces.

**Dipole-Dipole Forces**:

This type of force act between the molecules which have permanent dipole. Dipole of these molecule possess some partial charges (denoted by delta

**that is delta positive****or delta negative**^{}**)**^{}Example: HCl molecule, where H possess delta positive and Cl possess delta negative.

**Dipole-Induced Dipole Forces**:

These attractive forces act between polar and non-polar molecules where polar molecules have permanent dipole, which induced the dipole and non-polar molecule by deforming electronic cloud of non-polar molecule.

· As polarisability increases, strength of the attractive interaction also increases.

**Hydrogen-Bond:**

It is a type of dipole-dipole interaction present in molecules with high polar N-H, O-H and H-F bonds.

**Thermal Energy**:

It is the energy of the body arise due to the motion of its atoms and molecules.

· Thermal energy is directly proportional to temperature of the substances.

**Intermolecular forces v/s Thermal interactions**

· Intermolecular forces make molecules of the substance keep together.

· While thermal energy of the substance make molecules keep apart.

· These two (thermal energy and intermolecular forces) decides collectively the

*states of matter*.· If intermolecular forces predominance then

Gas->Liquid->Solid

· If thermal energy predominance then

Solid->Liquid->Gas

**What is Troposphere**:

It is the lowest layer of the atmosphere held to surface of the earth by gravitational forces where we live. It contains O

_{2}, CO_{2}, N_{2}and water vapors etc.**Gaseous State**:

Only 11 elements ( H, O, N, F, Cl, He ,Ne, Ar, Kr, Xe, Rn exists in gaseous state under normal conditions.

**Characteristic Physical Properties Of Gases**

· Gases are highly compressible.

· Gases exert the equal pressure in all direction.

· As compared to solid and liquids, gases have much lower density.

· Gases don’t have definite (fix) shape and volume.

· Gases mix completely and evenly in all proportions.

**Gas Laws**

**Boyle’s law**:

It is also known as Pressure Volume relationship.

As per Boyle’s law, ”At constant temperature and fixed amount of gases in no. of moles, its pressure varies inversely with its volume.”

Mathematically, at constant T and n,

P1/V ……………..1

P = k

_{1}x 1/V = k_{1}/V ………..2Where, P = Pressure, V = Volume and k = proportionality constant and value of k

_{1}depends upon Pressure P and Volume V.Also, K

_{1}= PV ………..3According to above relation, product of pressure P and volume V remains constant, if we fixed the amount of gas at constant temperature. You read these first class chemistry notes for classes 11 at online classes by www.ChemistryNotesInfo.com.

So, P

_{1}V_{1 }= P_{2}V_{2 }= Constant ………4Then, P

_{1}/ P_{2 }= V_{2}/V_{1 }……………..5As we know, Density is equal to mass divided by volume i.e. d=m/V

So, V = m/d …………6

From equation 2 & 6,

P = k

_{1}d/m· d = (m/k

_{1})/P = k’P ……………7Where, k’ = m/k

_{1}**Charle’s Law**:

This is also known as Temperature and Volume relationship.

As per Charle’s law, “At constant pressure and fixed mass of gas, Volume is directly proportional to Absolute temperature.”

Mathematically, at constant P and n,

**V T**

Also, V=k

_{2}TWhere, K

_{2}is a constant.**Thermodynamic Scale**:

Kelvin scale of the Temperature is known as the Thermodynamic Scale which is utilized in many scientific works.

**Kelvin Scale**:

To obtain temperature in Kelvin scale we add 273.15 (generally 273) in Celsius temperature.

i.e. K= 273.15 + °C (degree Celsius)

**Gay Lussac’s Law**:

This law is also known as Pressure and Temperature relationship.

According to Gay Lussac’s Law “At constant Volume and fixed amount of gas, pressure is directly proportional to temperature.”

Mathematically, at constant V and n,

**P T**

Also, P=k

_{3}TWhere, K

_{3}is a constant.**Avogadro’s Law**:

This law is also known as Volume and amount relationship.

According to Avogadro’s law “Equal volume of all the gases under same condition of pressure and Temperature contain equal no. of molecules.”

V n ………….1

V=k

_{4}n ……………2Where, V is volume, k

_{4}is a constant and n is no. of moles of gas.**Avogadro’s Constant**:

One mole has 6.022×10

^{23}no. of molecules which is called as Avogadro’s constant. As we know, mole is equal to mass divided by molar mass.So n = m/M ……………..3

Then from equation 2 & 3

V = k

_{4}(m/M)M = k

_{4}. m/VM = k

_{4}.d {here . represents multiplication}Where M is molar mass, m is mass and V is volume, K

_{4}is constant and d is density.**Ideal Gas Equation**:

Combination of 3 laws (Boyles Law, Charles Law and Avogadro law) gives a single equation (PV=nRT) called as Ideal gas equation.

Mathematically,

According to

*Boyle’s Law*; at constant T and n,V 1/P ……….1

According to

*Charles Law*; at constant P and n,V T ……….2

According to

*Avogadro Law*; at constant T and n,V n ……….3

From equation 1, 2 and 3; we get,

V nT/P ……….4

Or, V =R nT/P ……….5

Also, PV = nRT …………..6

Then, R = PV/nT ………..7

Where, R is a gas constant which is same for all gases and known as

**and equation 6, PV = nRT is known as***Universal Gas Constant**Ideal Gas Equation.***Equation Of State**:

Ideal gas equation is also known as equation of state because it gives relationship between 4 variables i.e. P, V, n and T. which describes state of any gas.

Let if pressure, volume and temperature of fixed amount of ideal gas changes from P

_{1}, V_{1}, T_{1}to P_{2}, V_{2}, T_{2}then,P

_{1}V_{1}/T_{1}= nR …………..8P

_{2}V_{2}/T_{2}= nR …………..9So, from equation 8 & 9, we get

P

_{1}V_{1}/T_{1}= P_{1}V_{1}/T_{1}………..10This above equation (eq. 10) is called

**Combined Gas Law**.**Density And Molar Mass Of Gaseous Substances**:

As per Ideal Gas Equation,

PV=nRT

Then, n/V = P/RT

On replacing n by m/M (as mole n= mass m/ molar mass M); we obtain,

m/MV=P/RT

On replacing m/V by density d; we obtain,

d/M=P/RT

Also, on rearrangement,

**M = dRT/P**

Where, M is molar mass, d is density, R is gas constant, T is temperature and P is pressure.

**Dalton Law Of Partial Pressure**:

According to Dalton law of partial pressure, “Total exerted pressure by mixture of all non-reactive gases is equal to the sum of partial pressure of all individual gases.”

At constant temperature T and Volume V

P

_{total}= p_{1}+p_{2}+p_{3}…………..Where, P

_{tolal}= total exerted pressure of mixture of all gases.p

_{1}, p_{2}, p_{3 }etc. is pressure exerted by individual gases known as partial pressure.**Aqueous Tension**:

It is exerted by the saturated water vapors.

P

_{drygas}= P_{total}– Aqueous Tension**Partial Pressure In Terms Of Mole Fraction**:

Let at T temperature, 3 gases of Volume V exert the partial pressure p1, p2, p3. Then as per ideal gas equation,

p

_{1}=n_{1}RT/Vp

_{2}=n_{2}RT/Vp

_{3}=n_{3}RT/VWhere, n

_{1}, n_{2}, n_{3}are no. of moles. Also, according to Daltons law of partial pressure

P

_{total}= p_{1}+p_{2}+p_{3}Or, P

_{total}= n_{1}RT/V + n_{2}RT/V + n_{3}RT/V = (n_{1}+n_{2}+n_{3})RT/VAnd, on dividing p

_{1}by P_{Total }, we obtainP

_{1}/ P_{Total}={n_{1}/(n_{1}+n_{2}+n_{3})}{RTV/RTV}P

_{1}/ P_{Total}=n_{1}/(n_{1}+n_{2}+n_{3}) = n_{1}/n = x_{1}Where, n= n

_{1}+n_{2}+n_{3}and x_{1}is mole fraction of first gas.So, p

_{1}=x_{1}P_{Total}Similarly, p

_{2}=x_{2}P_{Total}P

_{3}=x_{3}P_{Total}Then, general equation is written as-

P

_{i}=x_{i}P_{Total}Where, p

_{i }is partial pressure of i^{th}gas.x

_{i }is mole fraction of i^{th}gas.**Kinetic Molecular Theory Of Gases**:

The postulates or assumption of Kinetic molecular theory of the gases are as follows:

- · Gases contain atoms or molecules, as large no. of identical particles. These atoms or molecules are at large distances from each other, so that volume of gases is very high as compared to actual Volume of all molecules of gases. ‘Great compressibility of the gases is explained by these assumptions’.

- · Gases occupy all available space by expansion because at ordinary pressure and temperature there are no attractive forces between gas particles.

- · Gas particles always move in random and at constant motion because if gas particles are at rest and they occupy fixed positions then gas would have fixed shape, which is not observed at all.

- · Gas particles move in straight lines in all the possible directions. During random motion these particles collide with each other and also collide with the walls of the container of the gas. As a result of this collision of gas particles with wall of the gas container pressure is exerted by gas.

- · Collision between the gas molecules is perfectly elastic. It means total energy of the molecules don’t change that is It remains same before and after collision. Individual energy of the molecules may change due to exchange of energy between the colliding molecules, but sum of energies of all molecules remains same.

- · Molecules of the gas move with the different speeds and their individual speed goes on changing due to collision of molecules but at particular temperature, distribution of speeds of molecules remains constant.

- · Kinetic energy of molecules (of the gas) is directly proportional to absolute temperature because on heating gas at fixed volume, its pressure increases. As on heating molecules moves with more speed and strike with walls of the container more rapidly, so exerts more pressure.

**Behavior Of Real Gases**

**Deviation From Ideal Gas Behavior**:

When we do different experiments, we find that real gases don’t follow PV=nRT Equation of ideal gases. So real gases don’t follow Boyle’s law means, if we plot graph between PV and P then we don’t get parallel straight line at all pressures with X-axis.

**Graph**

*Real gases in above graph show some significant deviation from ideal gas behavior. As we see-*

1) Dihydrogen and helium shows positive deviation means PV value increases with increase in pressure.

2) Methane and Carbon monoxide shows negative deviation and positive deviation means first with increase in pressure, PV value decreases and reaches the minimum then starts increasing with increasing pressure.

- · Real gases don’t follow Boyle’s law, Charles law and Avogadro’s law perfectly under the all conditions, So real gases liquefy when they cooled and compressed.

- · Under very high pressure attraction forces start operating between molecules of gases so pressure exerted by real gases is lower than that of ideal gas, because in ideal gas there is no attraction force exists at high pressure.

P

_{ideal}=P_{real}+(an^{2}/V^{2}) …………..1P

_{real}= observed pressurean

^{2}/V^{2}= correction termWhere ‘a’ is constant

- · Under very high pressure gas molecule don’t move freely but restricted to (V-nb) Volume, Where nb is actual Volume occupied by the gas molecules themselves. So we can write gas equation for real gases as :

{P+(an

^{2}/V^{2})}(V-nb)=nRT …………2Equation 2 is known as van der walls equation.

Where n is no. of moles of the gas.

a and b is vander walls constant and value depends on gas characteristics.

- · Deviation from ideal behavior from real gases is measured with compressibility factor z.

Compressibility factor,

z = PV/nRT …………3

If z =1 gas is ideal gas because PV = nRT

If z > 1 or z<1, gas is real gas and If z > 1 then it is more difficult to compress gas.

- · Boyle’s temperature or Boyle’s point is a temperature at which real gas behaves like ideal gas under appreciable range of pressure.

- · Compressibility factor is also defined as ratio between actual molar volume and calculated molar volume

*As per above discussion we say that gases behave ideally –*

- 1. At low temperature and high pressure.

- 2. or, If volume occupied by the gas is very large therefore volume occupied by gas molecule can be neglected in comparison to it.

**Liquification Of Gases**

· The process of converting gas into liquid is known as liquification of gas

· The highest temperature at which gas start liquefying is known as critical temperature (T

_{c})· Volume of one mole of the gas at this critical temperature is known as critical volume (V

_{c})· Pressure at this critical temperature is known as critical pressure (P

_{c})· Gases are cooled below their critical temperature for the liquefication of gases

· When we apply cooling as well as compression, gases liquefy easily

**Liquid State**

Intermolecular forces in liquids are stronger than in gases. Liquid have definite (fix) volume and they can flow and take the shape of the container in which these liquids are stored. These online education classes degree notes are published by ChemistryNotesInfo.com and hosted at ChemistryNotesInfo.blogspot.com Vapour pressure, viscosity, surface tension are some physical properties of liquids which are described below-

**Vapor Pressure**:

Pressure exerted by the vapors on the walls of the container containing liquid is known as

*vapour pressure*.· Vaporization depends on temperature

· Vapour pressure at which equilibrium is achieved between liquid phase and vapor phase is known as

**or***Saturated Vapour Pressure**Equilibrium Vapour Pressure*· Boiling is a condition of free vaporization means vapor extends freely into the surroundings.

· Boiling temp. at 1 atm pressure is known as

*Normal Boiling Point*· Boiling temp. at 1 bar pressure is known as

*Standard Boiling Point*· Temp. at which clear boundary between liquid and vapors disappear is known as

*Critical Temperature***Surface Tension**:

Liquids tends to minimize their surface area because molecules of the liquid on the surface experience net attractive force towards the interior of the liquid, this characteristic property of the liquid is known as Surface Tension.

Example: Mercury do not form thin film and capillary action

**Viscosity**:

It is a measure of resistance to flow that arise due to internal friction between the layers of liquid (or fluid), when they slip over one another, during the flow of liquid or fluid.

· Force required to maintain flow of liquid layers is-

F=Adu/dz

Where, A is area of contact,

du/dz is velocity gradient,

is coefficient of viscosity.

SI unit of is “Newton second per square meter (Nsm

^{-2})”cgs unit of is “poise”

Read more education classes degree classes notes for School College University at www.ChemistryNotesInfo.com

very nice class 11 chemistry notes on states of matter chapter.